SG-P Series Safety Sensors From Panasonic

By : Transfer Multisort Elektronik Sp. z o.o.

0
160

SG-P is a series of new sensors from Panasonic enabling quick detection of the opening/closing of all device doors in safety applications etc.

SG-P1010-M-P

Magnetic sensors

SG-P2020-M-P

Sensors with RFID

The sensors are equipped with large and bright LED indicators that notify the user about the correct “closed condition” (green colour) or unsafe “open condition” (red colour) of the door. The devices employ the OSSD1/2 (output signal switching device) standard to communicate a change of condition to the machine controller so that it can be stopped upon access. It is possible to connect up to 30 sensors in series – the first component in the series is a master unit. If one of the connected units detects the unsafe condition (red colour), the remaining sensors flash in green to alert the operator of the danger.

The SG-P products are available with two different coding levels: high or low. High-coded models (RFID) are compatible with ISO 14119, which requires devices to be protected against intentional deactivation. Both the configuration of the series and the pairing of sensors with RFID transmitters takes place fully automatically after the first powering of the device – this simplifies and accelerates the installation process.

 Specification
Safety sensor type *:magnetic, RFID
Output configuration *:NPN/PNP
Power supply voltage:24V DC
Safety category:4
Additional features:LED operating condition indicator
Operating temperature:from -10°C to 55°C
IP rating:IP65

* depending on the model